MODULAR SHOWER

According to the dimensions of the glass, it is always necessary to purchase the necessary strut to ensure the stability of the screen. The struts are made of stainless steel and can be shortened at will, the cut is hidden in the chrome-plated end pieces (except for the corner strut, which cannot be adjusted).
The glass is fitted with an aluminium profile at the bottom, which gives the screens a more elegant appearance, while at the same time providing a better seal and facilitating handling and installation.

• some screens available in two colours - chrome and matt black
• variable screen solutions that can be assembled in almost any space
• one-piece shower screens to the wall or space or a combination of fixed walls and additional panels allow for countless variations
• 8 mm thick safety glass with a standard height of 2000 mm and ANTIDROP coating for easy cleaning
• wall and connection profiles are included, the wall profile allows a tolerance of 30 mm
• choice of 4 types of struts for optimal fixing of the glass parts and in a design of your choice
• the struts can be easily shortened to the desired size directly during installation, the cut is hidden in the chrome-plated end pieces (except for the corner strut, which cannot be adjusted)

The glass is fitted with an aluminium profile at the bottom, which gives the screens a more elegant appearance, while at the same time providing a better seal and facilitating handling and installation.

The elegant corner profile for the MS2 module combines two fixed parts into a single unit in a simple way.

The 180° swivel profile makes it possible to increase the entrance space.

The swivel part of module 3 is equipped with a silicone seal against water leakage.

Cleaning and maintenance

The fixed and moving parts of the product do not require any maintenance. Moving parts equipped with castor tracks can be lubricated with silicone oil spray. Cleaning can be carried out with water and suitable cleaning agents. No parts of the product may be cleaned with cleaning agents containing sand and substances of a similar nature. Product parts made of plastics (e.g. polyamide end caps, PVC gaskets or styrofoam fillings) must not be cleaned with cleaning agents containing organic solvents (e.g. alcohol or acetone).