THRON

Rolling wheel handles in the square SQUARE or round ROUND design significantly change the overall appearance of the door.

• clear 8 mm thick safety glass
• ANTIDROP coating on both sides prevents limescale build-up and facilitates cleaning
• height 2000 mm
• water splashing is prevented by a threshold rail with PVC seal
• the door is divided into sliding and fixed parts - allowing variable installation with left or right opening
• the door glass is freely hinged without a bottom guide profile
• the 10 mm high overflow bar allows almost wheelchair-accessible entry

Handles and wheel covers in square SQUARE design.

Handles and wheel covers in round ROUND design.

Rubber stop for damped door opening.

A magnetic seal glued to the glass ensures a tight seal between the door and the side wall.

Overflow rail with PVC seal prevents water splashing outside the shower enclosure.

The door can be hinged for convenient cleaning of the glass.

Cleaning and maintenance

The fixed and moving parts of the product do not require any maintenance. Moving parts equipped with castor tracks can be lubricated with silicone oil spray. Cleaning can be carried out with water and suitable cleaning agents. No parts of the product may be cleaned with cleaning agents containing sand and substances of a similar nature. Product parts made of plastics (e.g. polyamide end caps, PVC gaskets or styrofoam fillings) must not be cleaned with cleaning agents containing organic solvents (e.g. alcohola or acetone).